| |
| VESA - Video Electronics Standards Association |
The purpose of this standard is to define the physical mounting interface
standards for flat panel monitors used in moveable/desktop applications.
The typical mounting device for this standard would be an adjustable
arm or mount offering adjustment capabilities beyond a basic desk stand.
Within the VESA mounting interface standard there are two sizes, for smaller
monitors a 75 x 75mm (VESA 75) hole pattern is required and for larger
monitors a 100 x 100mm (VESA 100). |
| For smaller monitors VESA 75 is normally required. |
|
| For larger monitors VESA 100 is normally required. |
|
| Locating The VESA Standard |
The VESA mounting interface is normally located in the centre at the
rear of the monitor. In some cases a rear plastic cover may need to be
removed from the back of the monitor to locate the VESA hole patterns.
In most cases the basic desk stand of the monitor will need to be removed
before installing any of the FP Series. The hole pattern from the desk
stand usually does not comply to the VESA standard.
|
| Example layout of the back of a monitor to locate
the VESA standard |
|
|
|
